AllPoints™ Port Access Systems

AllPoints® Port Access System

AllPoints™ Port Access Systems

A redesigned, step-by-step port access system designed to aid clinicians in their efforts towards promoting consistency of care.

Features

Bard Access is the market leader of Port Access, and is the only major manufacturer that has an all-inclusive port access kit that includes the infusion needle.

Exclusive to Bard Access Systems and included in the AllPoints® Port Access Systems

AllPoints® Port Access System

Sentrinex® 3D Port Dressing

The 3D domed dressing, created specifically for port access, is designed to fit over the port needle and lay flat against the skin.

Purell

PURELL® Advanced Hand Sanitizer (Gel)

The single-use hand sanitizer package available exclusively for Bard Access Systems, helps ensure compliance with hand-hygiene policies.

port_stabilizer

Port Stabilizer

The Port Stabilizer is designed to aid in access when inserting the infusion needle into the port. Bard Access Systems developed the stabilizer to work with most power and non-power-injectable ports on the market. (The port stabilizer is included in select kits.)

The port stabilizer is contraindicated for dual lumen ports.

PURELL® Use: Hand sanitizer to reduce bacteria on the skin.
PURELL® Cautions/Warnings: Warning: Flammable. Keep away from fire or flame. For external use only. Do not use in or near the eyes. In case of contact, rinse eyes thoroughly with water. Stop use and consult a doctor if irritation occurs.

Consistency of Care

Designed with components that are presented in a step-by-step, sequential layout that may promote consistency of care.

Visual Guide

A visual guide/checklist is included to educate and assist you in tracking compliance with the procedure.

(Roll over image to view full checklist.)

A visual guide/checklist is included to educate and assist you in tracking compliance with the procedure.

Evidence-based guidelines

The AllPoints® Port Access System is designed to follow industry guidelines for accessing a patient’s implanted port.

Validate performance using well-designed forms or checklists that focus on objective, measurable assessment of the actual performance.1

—INS, pg S20

Adhere to aseptic technique during implanted port access, including use of sterile gloves and mask.1 (V)

—INS, pg S58

Store hand hygiene products in convenient locations at the point of use.1 (IV)

—INS, pg S38

Maintain aseptic technique for the insertion and care of intravascular catheters.2 Category 1B

—CDC, pg 30

Having standardized supply carts or kits with all the necessary CVC insertion and care supplies and equipment in ‘ready to go’ locations saves health care personnel time and helps ensure that the correct supplies and equipment are used for all insertion and maintenance procedures.3

—Joint Commission, pg 46

Use a transparent semipermeable membrane (TSM) dressing or gauze dressing that covers the noncoring needle and access site when the port is accessed.1 (IV)

—INS, pg S58

Use hospital-specific or collaborative-based performance improvement initiatives in which multifaceted strategies are ‘bundled’ together to improve compliance with evidence-based recommended practices.2 Category 1B

—CDC, pg 20

Hand hygiene should be performed before and after palpating catheter insertion sites as well as before and after inserting, replacing, accessing, repairing, or dressing an intravascular catheter.2 Category 1B

—CDC, pg 29

Kit configurations

Power and non-power-injectable device options

Infusion needles with or without the port stabilizer

Color-coded packaging by infusion needle type for quick and easy identification

A sterile field designed to accommodate a variety of workspace environments

PAKs Kit Configuration

To learn more about the AllPoints® Port Access System, click here to request more information from a clinical representative in your area.


References

1Infusion Therapy Standards of Practice, Supplement to January / February 2016 Volume 39 •Number 1S

2U.S. Department of Health and Human Services, Centers for Disease Control and Prevention. Guidelines for the Prevention of Intravascular Catheter-Related Infections. 2011

3The Joint Commission. Preventing Central Line–Associated Bloodstream Infections: A Global Challenge, a Global Perspective. Oak Brook, IL: Joint Commission Resources, May 2012.

Port Stabilizer

Inspired by Amanda, a young, brave cancer warrior, the Port Stabilizer is designed to aid in access when inserting the infusion needle.

Amanda's Story

Amanda was a young cancer patient who dreamed about going to the hospital and only having her port accessed one time, without pain or a peripheral IV. Many times she would visit the emergency room where her port was not utilized the way it was intended to be used. Her father would rush up to the Oncology department looking for an oncology nurse to access Amanda’s port.

Some nurses may not be familiar with accessing a port. That’s why the Port Stabilizer was developed, to aid in needle insertion.

Features

The Port Stabilizer includes these important features:

Stabilizer Features

Video

Watch this video to see how the Port Stabilizer aids in accessing a port.

To learn more about Amanda and the non-profit created in her legacy, visit Amanda Hope Rainbow Angel’s website.

Kit Configuration

The AllPoints® Port Access System is designed to assist you in maintaining sterile technique by providing masks, gloves, and hand sanitizer. Kit components are arranged in sequential layout to help promote consistency of care.

Power Needle Systems

Component Product Codes
AN132075 AN142010G AN142010 AN142075
PowerLoc® MAX 20G x 0.75 in with Y-Site 1
PowerLoc® MAX 20G x 1 in 1 1
PowerLoc® MAX 20G x 0.75 in 1
Insert - Visual Guide/Checklist (No Stabilizer) 1 1 1 1
Prep pad, skin protectant 1 1 1 1
Absorbent Towel 1 1 1 1
ChloraPrep®, 3 mL 1 1 1 1
GuardIVa® Dressing 1
PURELL® Advanced Instant Hand Sanitizer (Gel) 2 2 2 2
Sentrinex® 3D Port Dressing 1 1 1 1
Gloves, Silver (prep) 1 1 1 1
Face Mask 2 2 2 2
Gloves, Purple (sterile) 1 1 1 1
Saline Syringe 1 1 1 1

Power Needle Systems with Stabilizer

Component Product Codes
AS132075 AS142010G AS142010 AS142075
PowerLoc® MAX 20G x 0.75 in with Y-Site 1
PowerLoc® MAX 20G x 1 in 1 1
PowerLoc® MAX 20G x 0.75 in 1
Insert - Visual Guide/Checklist (With Stabilizer) 1 1 1 1
Prep pad, skin protectant 1 1 1 1
Fenestrated Drape 1 1 1 1
Stabilizer, 0.75 inch 1 1
Stabilizer, 1 inch 1 1
ChloraPrep®, 3 mL 1 1 1 1
GuardIVa® Dressing 1
PURELL® Advanced Instant Hand Sanitizer (Gel) 2 2 2 2
Sentrinex® 3D Port Dressing 1 1 1 1
Gloves, Silver (prep) 1 1 1 1
Face Mask 2 2 2 2
Gloves, Purple (sterile) 1 1 1 1
Saline Syringe 1 1 1 1

Non-Power Needle Systems

Components Product Codes
AN152075G AN152075 AN162010G AN162010 AN162075G AN162075
SafeStep® 20G x 0.75 in with Y-Site 1 1
SafeStep® 20G x 1 in 1 1
SafeStep® 20G x 0.75 in 1 1
Insert - Visual Guide/Checklist (No Stabilizer) 1 1 1 1 1 1
Prep pad, skin protectant 1 1 1 1 1 1
Absorbent Towel 1 1 1 1 1 1
ChloraPrep®, 3 mL 1 1 1 1 1 1
GuardIVa® Dressing 1 1 1
PURELL® Advanced Instant Hand Sanitizer (Gel) 2 2 2 2 2 2
Sentrinex® 3D Port Dressing 1 1 1 1 1 1
Gloves, Silver (prep) 1 1 1 1 1 1
Face Mask 2 2 2 2 2 2
Gloves, Purple (sterile) 1 1 1 1 1 1
Saline Syringe 1 1 1 1 1 1

Non-Power Needle Systems with Stabilizer

Components Product Codes
AS152075G AS152075 AS162010G AS162010 AS162075G AS162075
SafeStep® 20G x 0.75 in with Y-Site 1 1
SafeStep® 20G x 1 in 1 1
SafeStep® 20G x 0.75 in 1 1
Insert - Visual Guide/Checklist (With Stabilizer) 1 1 1 1 1 1
Prep pad, skin protectant 1 1 1 1 1 1
Fenestrated Drape 1 1 1 1 1 1
Stabilizer, 0.75 inch 1 1 1 1
Stabilizer, 1 inch 1 1
ChloraPrep®, 3 mL 1 1 1 1 1 1
GuardIVa® Dressing 1 1 1
PURELL® Advanced Instant Hand Sanitizer (Gel) 2 2 2 2 2 2
Sentrinex® 3D Port Dressing 1 1 1 1 1 1
Gloves, Silver (prep) 1 1 1 1 1 1
Face Mask 2 2 2 2 2 2
Gloves, Purple (sterile) 1 1 1 1 1 1
Saline Syringe 1 1 1 1 1 1

Specifications

Product Code Description Case Qty Minimum
Order Qty
AN132075 Port Access System, PowerLoc® MAX with Y-Site, 20g x .75” 10 per case 1 case
AN142075 Port Access System, PowerLoc® MAX, 20g x .75” 10 per case 1 case
AN142010 Port Access System, PowerLoc® MAX, 20g x 1” 10 per case 1 case
AN142010G Port Access System, PowerLoc® MAX, GuardIVa® Dressing, 20g x 1” 10 per case 1 case
AN152075 Port Access System, SafeStep® Huber Needle Set with Y-Site, 20g x .75” 10 per case 1 case
AN152075G Port Access System, SafeStep® Huber Needle Set with Y-Site, GuardIVa® Dressing, 20g x .75” 10 per case 1 case
AN162075 Port Access System, SafeStep® Huber Needle Set, 20g x .75” 10 per case 1 case
AN162010 Port Access System, SafeStep® Huber Needle Set, 20g x 1” 10 per case 1 case
AN162075G Port Access System, SafeStep® Huber Needle Set, GuardIVa® Dressing, 20g x .75” 10 per case 1 case
AN162010G Port Access System, SafeStep® Huber Needle Set, GuardIVa® Dressing, 20g x 1” 10 per case 1 case
AS132075 Port Access System with Stabilizer, PowerLoc® MAX with Y-Site, 20g x .75” 10 per case 1 case
AS142075 Port Access System with Stabilizer, PowerLoc® MAX, 20g x .75” 10 per case 1 case
AS142010 Port Access System with Stabilizer, PowerLoc® MAX, 20g x 1” 10 per case 1 case
AS142010G Port Access System with Stabilizer, PowerLoc® MAX, GuardIVa® Dressing, 20g x 1” 10 per case 1 case
AS152075 Port Access System with Stabilizer, SafeStep® Huber Needle Set with Y-Site, 20g x .75” 10 per case 1 case
AS152075G Port Access System with Stabilizer, SafeStep® Huber Needle Set with Y-Site, GuardIVa® Dressing, 20g x .75” 10 per case 1 case
AS162075 Port Access System with Stabilizer, SafeStep® Huber Needle Set, 20g x .75” 10 per case 1 case
AS162010 Port Access System with Stabilizer, SafeStep® Huber Needle Set, 20g x 1” 10 per case 1 case
AS162075G Port Access System with Stabilizer, SafeStep® Huber Needle Set, GuardIVa® Dressing, 20g x .75” 10 per case 1 case
AS162010G Port Access System with Stabilizer, SafeStep® Huber Needle Set, GuardIVa® Dressing, 20g x 1” 10 per case 1 case