StatLock® CNB (Continuous Nerve Block)
Stabilization Device
- Designed for securement of epidural catheters used for regional anesthesia.
- Features a serpentine retainer with an integrated, adhesive core for added securement.
Features
StatLock® Stabilization Devices are a more effective alternative to tape in helping improve clinical outcomes, quality of care and economic efficiencies. The StatLock® CNB (Continuous Nerve Block) Stabilization Device is designed for securement of epidural catheters used for regional anesthesia.
Please consult product labels, IFU and package inserts for any indications, contraindications, hazards, warnings, cautions and instructions for use.
Specifications
| Stand Alone/Kit | Category/Description | Item Number | Pkg | Natural Latex? |
|---|---|---|---|---|
| Stand Alone | StatLock® CNB Stabilization Device, Crescent | VEDC2 | 25/case | No |
Specifications subject to change without notice.
Resources
Please refer to the below-listed Instructions for Use (IFUs) for any indications, contraindications, hazards, warnings and cautions.
Prescriptive Information
INDICATIONS FOR USE: The StatLock® stabilization device is compatible for medical tubes and catheters.
CONTRAINDICATIONS: Known tape or adhesive allergies. Known sensitivity to benzoin. (Zinc Oxide PICC Neonatal Universal)
WARNINGS AND PRECAUTIONS
- Do not use the StatLock® stabilization device where loss of adherence could occur, such as with a confused patient, unattended access device, diaphoretic or non-adherent skin, or when the access device is not monitored daily.
- Observe universal blood and body fluid precautions and infection control procedures, during the StatLock® stabilization device application and removal.
- Suture the StatLock® stabilization device pad to skin if necessary or deemed necessary.
- Avoid the StatLock® stabilization device contact with alcohol or acetone, both can weaken bonding of components and the StatLock® stabilization device pad adherence.
- Minimize catheter manipulation during StatLock® stabilization device application and removal.
- Remove oil and moisturizer from targeted skin area.
- The StatLock® stabilization device pad adherence and catheter/tube position should be routinely inspected.
- Orient the StatLock® stabilization device so arrows point toward the catheter tip.
- The StatLock® stabilization device should be replaced every 7 days.
- A StatLock® stabilization device luer-lock connector must be used to secure venous and arterial catheters.
- Always apply the adhesive strip to central venous and arterial catheters at or near the insertion site when using a StatLock® stabilization device.
- This is a single use device. Reuse/and or repackaging may create a risk of patient or user infection, compromise the structural integrity and/or essential material and design characteristics of the device, which may lead to device failure, and/or lead to injury, illness or death of the patent.
- Do not re-sterilize. The sterility of the single use device is not guaranteed following re-sterilization because of an indeterminable degree of potential pyrogenic or microbial contamination which may lead to infection complications. Re-sterilization may compromise the structural integrity, essential material and/or design characteristics and may lead to an unpredictable loss of functionality and/or device failure.
- Special Patient Population
- Do not use alcohol or acetone containing products on pre-term infants